WASHING MACHINE

How to Start a Wash
1. Open the door and place laundry inside. Don’t overload:
2. Add detergent to the drawer:
o Left compartment: detergent for main wash
o Right compartment: fabric softener (optional)
3. Turn the dial to choose your program (e.g. Cotton, Snel 30’, etc.)
4. Press the Start/Pause button. The door will lock and the cycle will begin.

After Each Use: Filter & Care
• After washing, please leave the door open
• This helps prevent mold and keeps the drum fresh

What Not to Do
• Don’t use too much detergent
• Don’t slam the door - it closes softly.



DRYER

Using the Dryer
1. Load clothes (not too full – they should tumble easily).
2. Close the door and press the Power button.
3. Turn the knob to choose a program (use Eco or Cupboard Dry for most loads).
4. Press Start/Pause to begin.

Extra Tips
• For small loads or quick drying, use Rapid.
• If the dryer doesn’t start, check that the door is fully closed.

Quick Reminders:
• Please don’t overload the dryer - it works best when filled loosely.

After Each Drying Cycle: This dryer uses a condensation system. Moisture from your laundry collects in a tank instead of venting outside.
• Gently pull out the water tank, located at the top left - drawer-style tray
• Carry it to the sink or outside
• Open the spout or cap and pour out the water completely
• Push the tank back in firmly until it clicks into place
Note: If the tank is full, the dryer will pause automatically and alert you to empty it.

Clean the Door Filter - This filter collects lint and must be cleaned after every use.
• Open the dryer door
• Pull the filter out of the drum opening - located at the front-bottom edge of the drum
• Open the filter and remove all lint and fluff by hand.
• Close the filter and place it back into position.

Clean the Bottom Filter (behind bottom panel) If You’ve Used the Dryer a Couple of Times
• Open the small kick panel door
• Unclip and slide out the bottom filter
• Remove any fluff or buildup
• Reinsert and close the panel door